CCNP Training (Cisco Certified Network Professional)

Train Yourself for Routeing and Switching

Training provided at nearby locations.
Certified Trainers to teach the delegates.
High Perks after Certification

This CCNP training is meant for those professionals who have one year of experience in the networking field and is one of many CISCO training. These professionals plan, implement, verify and troubleshoot LAN’s and WAN’s while working in conjunction with other network specialists such as those who work on the security system, wireless, voice and video solutions. The knowledge obtained from this certification provides a lasting foundation that is relevant in the physical as well as the virtualized networks of today and the coming times.

Who should take this course

Network professionals including network engineers.
Network operations centre (NOC) technical support staffs.
Help desk specialists.
Any individual involved in implementation and verification of routeing protocols in enterprise networks.

Prerequisites

Delegates must be experienced in the audit of operation path and switching technologies and implementation experience as required by the Cisco Network Devices Part 1 Version 2.0 (ICND1) and Cisco Network Devices Part 2 Version 2.0 (ICND2) courses.Any delegates having an equal skill can also sit for this course.

What Will You Learn

On completing the course, the candidates will have gained familiarity with the following concepts:

Plan and document the configuration and verification of routeing conventions in enterprise networks
Identify, analyse, and match OSPF multiarea routeing functions and benefits
Deploy and verify a Layer 3 solution using BGP to connect an enterprise network to a service provider
Implement and verify a redistribution solution in a multiprotocol network using Cisco IOS Software features
Identify the technologies, modules, and metrics of EIGRP
Evaluate common network performance issues and determine the implements that are needed to provide Layer 3 path control that uses Cisco IOS Software features to control the path

Key Learning Points

Tutor Support

Courseware

Course Overview

This certification is job-role-focused and utilises lab-based learning. Besides it also allows the candidates to maximise their investment in education and increase the value of their enterprise network.The training tests the routeing,switching and troubleshooting knowledge and skills of the candidates.

Course Content

Routing:

Network Principles

Identify Cisco Express Forwarding concepts
Explain general network challenges
Describe IP operations
Describe TCP operations
Describe UDP operations
Recognise proposed changes to the networkLayer 2 Technologies
Configure and verify PPP
Explain Frame Relay

Layer 3 Technologies

Identify, set, and test IPv4 addressing and subnetting
Describe ROUTE maps
Configure and test loop prevention mechanisms
Configure and verify RIPv2
Describe RIPng
Define IPv6 addressing and subnetting
Configure and verify static routeing
Configure and test default routeing
Evaluate routeing protocol types
Establish administrative distance
Troubleshoot passive interfaces
Configure and verify VRF Lite
Configure and test filtering with any protocol
Configure and verify redistribution between any routeing
Describe EIGRP packet types
rules or path sources
Configure and check manual and auto-summarization with any path protocol
Configure and test policy-based routeing
Identify suboptimal routeing
Configure and verify EIGRP neighbour relationship and authentication
Configure and verify EIGRP for IPv6
Define OSPF packet types
Configure and verify OSPF neighbour relationship and authentication
Configure and verify EIGRP stubs
Configure and verify EIGRP load balancing
Describe and optimise EIGRP metrics
Configure and test network types, area types, and router types
Configure and verify OSPF path preference
Configure and verify OSPF operations
Configure and verify OSPF for IPv6
Describe, configure, and verify BGP peer relationships and authentication
Configure and test e-BGP (IPv4 and IPv6 address families)
Explain BGP attributes and best-path selection

VPN Technologies

Configure and test GRE
Describe DMVPN (single hub)
Describe Easy Virtual Networking (EVN)

Infrastructure Services

Configure and check device management
Configure and test SNMP
Configure and verify IP SLA
Configure and test tracking objects
Configure and test Cisco Net Flow
Configure and test logging
Configure and test Network Time Protocol (NTP)
Configure and test IPv4 and IPv6 DHCP
Configure and test IPv4 Network Address Translation (NAT)
Describe IPv6 NAT
Define SLA architecture

Infrastructure Security

Explain IOS AAA using local database
Identify device security using IOS AAA with TACACS+ and RADIUS
Configure and verify device access control
Configure and test router security features

SWITCHING (300-115)

Layer 2 Technologies

Configure and test switch administration
Configure and verify Layer 2 protocols
Configure and verify VLANs
Configure and verify trunking
Configure and test Ether Channels
Configure and verify spanning tree
Configure and check other LAN switching technologies
Describe chassis virtualization and aggregation technologies

Arrangement Security

Define method security using Cisco IOS AAA with TACACS+ and RADIUS
Design and test switch security types

Support Services

Configure and test first-hop redundancy protocols

TROUBLESHOOTING (300-135)

Network Principles

Use Cisco IOS troubleshooting tools
Apply troubleshooting methodologies

Layer Technologies

Troubleshoot switch administration
Troubleshoot Layer 2 protocols
Troubleshoot VLANs
Troubleshoot trunking
Troubleshoot Ether Channels
Troubleshoot spanning tree
Troubleshoot other LAN switching technologies
Troubleshoot chassis virtualization and aggregation technologies
Troubleshoot filtering with any protocol
Troubleshoot between any routing protocols or path sources
Troubleshoot manual and auto-summarization with any track protocol
Troubleshoot policy-based routing
Troubleshoot IPv4 addressing and subnetting
Troubleshoot IPv6 addressing and subnetting
Troubleshoot EIGRP stubs
Troubleshoot EIGRP load balancing
Troubleshoot EIGRP metrics
Troubleshoot EIGRP for IPv6
Troubleshoot OSPF neighbour relationship and authentication
Troubleshoot network kinds, area types, and router types
Troubleshoot OSPF path preference
Troubleshoot OSPF operations
Troubleshoot static routing
Troubleshoot default routing
Troubleshoot administrative distance
Troubleshoot passive borders
Troubleshoot VRF Lite
Troubleshoot suboptimal routing
Troubleshoot loop prevention mechanisms
Troubleshoot RIPv2
Troubleshoot EIGRP neighbour relationship and authentication
Troubleshoot loop-free path selection
Troubleshoot EIGPR operations

About Gloucester

Gloucester is a county city in Gloucestershire located in the south-west of England. Gloucester deceits close to the Welsh border, on the River Severn, between the Cotswolds to the east and the Forest of Dean to the south-west. King Henry II granted its first charter in 1155. Frugally, the city is conquered by the service industries, and has a high monetary and business sector and was protuberant in the atmosphere manufacturing.

Geography:

Gloucester is the regional town of Gloucestershire. It is the 53rd largest settlement in the UK. Its population was 110,600 in 2002. By 2011 the city had a population of 121,900, and by 2012 its population was 123,400. Growth feasts outside city limits, with many remote regions. The 2011 survey reports the population of the Gloucester as 149,820.

The city lies on the eastern bank of the River Severn. It is sheltered by the Cotswolds to the east, while the Forest of Dean and the Malvern Hills rise to the west and north. The wharfs, granaries and the docks themselves fell into disorder until their face-lift in the 1980s. They now form a public open space. Some granaries now house the Gloucester Waterways Museum and others were rehabilitated into housing flats, shops and bars. Moreover, the Gloucestershire Museum's soldiers is located in the Custom House. Next to the gallery is Gloucester Yacht Club. The port motionless houses the most inland RNLI lifeboat in the United Kingdom.

Attractions:

Gloucester Cathedral, in the north of the city near the river, creates the basis of an abbey devoted to Saint Peter in 681. It is the burial home of King Edward II and Walter de Lacy. The cathedral is very famous as it was used in the films like Harry Potter and the Philosopher's Stone, Harry Potter and the Chamber of Secrets and much more.

Many feudal and Tudor period gabled and half-timbered houses endure from previous eras of Gloucester's history. At the point where the four principal roads crossed stood the Tolsey, which was relieved by a modern building in 1894. None of the old public structures is left but for the New Inn in Northgate Street. It is a forested house, with strong, enormous external colonnades and patios. It was built around 1450 by John Twyning, a monk.